The th-210 linear array has excellent frequency response, and the range of 50-20khz can provide a flat response output, which can be extended to 30Hz with the bass in the th-210d.
TH - 210, the whole system consists of two lines of four units, external crossover design, only 10 inch woofer collocation in phase 2, cooperate with two 1.7 -inch high drive, combined with the special coupling horn, can very good control of high-frequency directivity.
According to the need of sound amplification, it also satisfies the effective attenuation within the vertical 10 degree range.
To make multiple speaker systems work without interference between each other, to achieve the requirement of range amplifying.
The high frequency and low frequency thickness in TH-210 is suitable for the expansion of large and medium-sized occasions.
Th-210 and th-210d are used at the same time for better acoustic properties.
TH - 210 system is a combination of a variety of optimization design, from physical properties to acoustic performance is optimized to a great extent, the mold design of hanging device to a great extent, make the product more simple and convenient installation, attaches more reasonable, more science focus, at the same time meet the 12 TH - 210 lifting without safety problems.
Whether fixed installation or flow performance, hoisting and its convenience.
The four-point lifting combination makes it more convenient to use TH-210D.
Model
|
TH-102
|
LF driver
|
2×10"
|
MF driver
|
/
|
HF driver
|
2×1.7"
|
Frequency
response(Hz)
|
50-2kHz LF /
1000-15kHz HF
|
Impedance(ohms)
|
16ΩLF/16ΩHF
|
Rms power (W)
|
500W LF /150W HF
|
Peak power
(W)
|
1000W LF /300W
HF
|
Sensitivity(SPL
1W@1M)
|
90dB LF/97dB HF
|
Maximum SPL
(dB)
|
120dB LF/123dB
HF
|
Coverage
angle
|
120°×10°
|
Structure
|
Birch plywood
|
Finish
|
Polyurea coating
|
System type
|
crossover outside外置分频
|
Connector
|
SPEAKON*2 pin1=LF
pin2=HF
|
Net
weight(Kg)
|
32Kg
|
Gross
weight(Kg)
|
|
Full
size(L*H*D)mm
|
800×282×525
|